仿威圖柜就是配電柜的一種，由于有些配電柜較大所以組裝起來比較麻煩，在組裝時常有一些細節是我們不注意的。因此我們在安裝時必須要注意一些細節問題。下面小編就為大家介紹一些通宇恒成加工安裝時要注意的細節問題：

　　Imitation Weitu cabinet is a type of distribution cabinet. Due to the large size of some distribution cabinets, it is difficult to assemble them, and there are often some details that we do not pay attention to during assembly. Therefore, we must pay attention to some details during installation. Below, the editor will introduce some details to pay attention to when processing and installing Tongyu Hengcheng:

　　1.安裝嵌條：已打好裝配孔的嵌條垂直焊接在操作臺門的兩側，使用M4自攻螺絲，方便安裝。

　　1. Installation of embedded strips: The embedded strips with assembly holes have been vertically welded on both sides of the control panel door, using M4 self tapping screws for easy installation.

　　2.密封膠條：仿威圖柜的技術指標,三元乙丙密封膠條密封性能可靠。

　　2. Sealing strip: The technical specifications of the imitation Weitu cabinet indicate that the sealing performance of the EPDM sealing strip is reliable.

　　3.門使用銷釘式鉸鏈，可開啟110°。

　　3. The door uses a pin type hinge that can be opened 110 degrees.

　　4.槽型箱邊：防止灰塵和水進入箱內，并能夠完好地與密封圈配合，形成對箱內的防護。

　　4. Groove shaped box edge: prevents dust and water from entering the box, and can be perfectly matched with the sealing ring to form protection for the box.

　　5.底部采用凸臺蓋板或海綿進線夾進線。

　　5. The bottom adopts a convex cover plate or sponge wire clamp for wire entry.

　　6.操作臺蓋板采用液壓支撐桿支撐，方便開啟。

　　6. The control panel cover is supported by hydraulic support rods for easy opening.

　　以上就是關于仿威圖柜加工安裝的注意事項的介紹，希望能幫到大家！

　　The above is an introduction to the precautions for processing and installing imitation Weitu cabinets. I hope it can be helpful to everyone!

　　本文由 濟南仿威圖柜  友情奉獻.更多有關的知識請點擊  http://www.cnshanqi.com/   真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from Jinan Fangweitu Cabinet For more related knowledge, please click http://www.cnshanqi.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.